Attaching the Proof Support Tray
When using B4, LG or larger paper, or when using limp paper, the sheet may become kinked, resulting
in premature full detection.
This can be solved by attaching the proof support tray [B] on the proof tray [A].
Problem that may occur after attaching this support tray:
When printing A4, LT or smaller paper with the support tray, the machine stacks only 200 sheets, which
is less than the standard specification of 250 sheets.
When printing B4, LG or larger paper with the support tray, the machine stacks 50 sheets, which is the
same as the standard specification.
2. Installation
204
To Next Page
Loading...
