Difference between Non-contact Transport and Contact Transport in DF Scanning
Transport
Method
Non-contact Transport Contact Transport
Descriptions
Because of the film attached to the
glass, the original doesn’t contact the
glass.
While passing, the original contacts the
glass.
Merit
It almost never causes stripes on the
image that arise from foreign
substances transferring from the
original to the glass.
It almost never causes stripes on the
image that arise from dust on the glass,
because the glass is cleaned by contact
with the transported original.
Demerit
Compared with the contact method,
stripes on the image caused by dust
occur more often.
Compared with the non-contact method,
stripes on the image caused by foreign
substances transferred from the surface of
an original to the glass occur more often.
Aim
To improve prevention of stripes in the
image caused by sticky foreign
substances.
Considering the target users of this
machine, it’s important to improve
prevention of stripes caused by dust in
the path
Note
1. Be sure to replace the sheet-
through glass with the film
attached on the glass.
2. When you attach the film on the
glass, you need to keep the left
scale attached on the glass in
order to fix the location of the
film.*1
3. You can change the method
(contact method to non-contact,
or vice versa) by replacing some
parts.*1
-
*1: For details, page 1060 "Vertical Streaks on Copies due to Scanning Problems".
Scanning
1109
To Next Page
Loading...
Need help?
General
