3. After machine servicing is completed:
• Change SP5-169 from "1" to "0".
• Turn OFF then ON the machine power. Tell the administrator that you have completed
servicing the machine.
• The Administrator will then set the "Service Mode Lock" to ON.
Remarks
The maximum number of characters which can show on the control panel screen is limited to 30
characters. For this reason, some of the SP modes shown on the screen need to be abbreviated. The
following are abbreviations used for the SP modes for which the full description is over 20 characters.
Item Description
Paper Weight
Thin paper: 52-59 g/m
2
, 14-15lb. Bond
Plain Paper1: 60-74 g/m
2
, 16-20lb. Bond
Plain Paper2: 75-81 g/m
2
, 20lb. Bond
Middle Thick: 82-105 g/m
2
, 20-28lb. Bond
Thick Paper1: 106-169 g/m
2
, 28lb. Bond-90lb. Index
Thick Paper2: 170-220 g/m
2
, 65-80lb. Cover
Thick Paper3: 221-256 g/m
2
, 80lb. Cover-140lb. Index
Thick Paper4: 257-300 g/m
2
, 140lb. Index-110lb. Cover
Paper Type
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
Paper Feed Station
P: Paper tray
B: Bypass tray
Print Mode
S: Simplex
D: Duplex
Others
The settings of each SP mode are explained in the right-hand column of the SP table in the following
way.
[Adjustable range / Default setting / Step] Alphanumeric
5. System Maintenance
670
To Next Page
Loading...
Need help?
General
