Smart Card Reader Built-in Unit Type M19
(D3BS-22)
Accessory Check
No. Description Q’ty Remarks
1 Corner Cover 1
2 IC Card Reader Spacer 1
3 IC Card Reader Table 1
4 Sponge 2
Installation Procedure
• When installing this option, turn OFF the main power and unplug the power cord from the wall
socket. If installing without turning OFF the main power, an electric shock or a malfunction may
occur.
An IC card reader and a USB cable are not included with this unit. The customers must obtain these
themselves, and the technicians must install them.
There are 2 ways to connect the USB cable of the IC card. One is to the machine USB slot which is the
same way as the previous machine, and another is to the smart operation panel USB slot.
Smart Card Reader Built-in Unit Type M19 (D3BS-22)
331
To Next Page
Loading...
