Lamp power:
NA/TWN EU/AA/CHN
Center 647 W 700 W
Edge 344 W 527 W
Nip pad
Presses against the pressure roller to form a fusing nip. The top surface is covered with a slippery
sheet.
Reflector
Transmits heat efficiently to the fusing sleeve belt.
Flanges
Situated on both ends of the fusing sleeve belt. They maintain the shape of the belt.
Heat conduction plate
Disperses the temperature deviation between the front and rear edges of the fusing sleeve belt to
make the temperature uniform.
Fusing Drive
The pressure roller [B] is driven by the fusing motor [A].
The fusing sleeve belt [C] is driven by the pressure roller (drag rotation).
7. Detailed Descriptions
1190
To Next Page
Loading...
