Ricoh MP C2504 User Manual

No. Situations judged as machine in use
5 While scanning (copy, scanner, fax)
6 Retrieving image data via network
7 While initial setting (User Tools settings) or SP is being set
8 While fax is transferring data
9 During on hook / on handset
10 During the PC-FAX process (from PC to machine data transfer to the end of the job)
11 While shifting to/from the energy server mode
12
When not being able to run firmware update due to the modules that are running
e.g.) Waiting for DCS transfer (refer to appendix), accessing devices such as HDD/SD card,
etc.
13 While displaying a preview
14 While the document server function is in use
15 Connecting to TWAIN
16 During the interrupt copy process
17 While displaying the printer menu
18
While updating the display for the document server function via WIM or for stored fax
documents
19 While writing log information
20 While accessing the address book
21 During SC
Update Process
When the machine has decided to run the auto firmware update, the following message is displayed.
Firmware Update (Auto Remote Firmware Update)
705

Ricoh MP C2504 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Type	Flatbed, ADF
Max Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Memory (RAM)	2 GB
Print Speed	25 ppm (A4)
Copy Speed	25 cpm (A4)
Fax Resolution	200 x 200 dpi
Paper Capacity	1200 sheets
Connectivity	USB, Ethernet, Wi-Fi
Dimensions	587 x 685 x 913 mm
Control Panel	9-inch Smart Operation Panel