Name: Ricoh MP C2504
Brand: Ricoh
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2. Replace IPU

3. Replace CTL

4. Replace PSU

SC670-03

IPU start up error when the machine boots up.

Replace the part in order of precedence stated below (since there is a high possibility that those

parts are broken and causing the error).

1. Replace IPU

2. Replace CTL

3. Replace PSU

4. Replace BCU.

SC670-04

Communication error between the engine and controller.

Replace the part in order of precedence stated below (since there is a high possibility that those

parts are broken and causing the error).

1. Replace IPU

2. Replace BCU

3. Replace CTL

4. Replace PSU

When SC672 (Controller start up error) Is Displayed

Symptom

Note: CTL = Controller

The following occur:

SC672-00

Communication error between operation panel and CTL after machine is powered

on.

SC672-10

Communication error (receive) between operation panel and CTL after machine is

powered on.

SC672-11

Communication error (send) between operation panel and CTL after machine is

powered on.

SC672-12 Communication error between operation panel and CTL after normal start-up.

6. Troubleshooting

978

Questions and Answers:

Need help?

Do you have a question about the Ricoh MP C2504 and is the answer not in the manual?

Ricoh MP C2504 Specifications

General