Move Exec
"Move Exec" (SP5-873-001) lets you move application programs from the original SD card to another
SD card.
• The SD card as a destination is not specified.
1. Turn the OFF the main power.
2. Remove the SD card slot cover [A] ( ×1).
3. Set the destination SD card (SD card where data is to be stored) in Slot 1 [A], and set the
original SD card (SD card from which data is to be transferred) in Slot 2 [B].
4. Turn ON the main power, and press [ENTER] in SP5-873-001 (SD Card Appli Move:
Move Exec).
5. When a confirmation screen is displayed, press [ENTER] (it takes about 2 - 3 minutes).
• If [CANCEL] is pressed, the display returns to the previous screen.
• Note that if the power supply is turned off, a panel operation is performed, or the cover is
opened during merge, it will result in a malfunction.
SD Card Appli Move
349
To Next Page
Loading...
