5. Check if one of the following messages appears: "Will you download the latest package
Ver *** and update?" or "The installed package is the latest version.".
• If the message appears, it is possible to execute ARFU.
->Press “No” and close SP mode to complete the configuration.
• If the message does not appear, it is not possible to execute ARFU.
->Check the network settings again.
• Update will run immediately if you press “Yes” at the message "Will you download the latest
package Ver *** and update?" Update cannot be canceled, as it is run by SFU. (Update can be
canceled for ARFU.)
• If the access to the global server is restricted, request the network administrator (customer) to permit
the following FQDN name for communication.
- FQDN: p-rfu-ds2.support.ricoh.com
• SP5-886-116 (Auto Update Prohibit Term Setting) displays the scheduled date and time of the next
ARFU.
• If the scheduled date and time of the next ARFU coincides with a time and day of the week when
ARFU is prohibited, the machine sends an inquiry to the server to check if there is a new firmware
package at this time. If there is a new firmware package, it is downloaded in the background, but
the package updating is cancelled and executed on the next occasion, 76 hours later, to update
the package.
Specifying the Time and Day of the Week to Prohibit Updating via Web Image Monitor
1. Start the Web Image Monitor.
2. Log in as the machine administrator.
3. Point to [Device Management], and then click [Configuration].
Main Machine Installation
87
To Next Page
Loading...
Need help?
General
