Name: Ricoh MP C2504
Brand: Ricoh
Rating: 4 (1 reviews)

To Next Page

To Previous Page

40. Ensure that the operation panel displays finisher jobs properly and that it works properly.

Stapleless Stapler Initial Settings

• To adjust the strength of the crimp between sheets of stapled paper, there is a setting to select either

single or double stapling.

• The crimp is weakened when there is an image (toner) at the point which is to be stapled. There

also is a setting to mask the image on the point for stapling, in order to prevent the crimp from

being weakened.

• Depending on users demands, explain the settings/methods of the settings by checking the

following instructions.

How to Change the Setting of Staple Method for Stapleless Stapler

Use this procedure to select the type of stapling that is done by the stapleless stapler.

Note that if you change the finisher type from Finisher SR3210 to Internal Finisher SR3180, which has

the same type of stapleless staple unit, the current setting in [Stapling Method for Stapleless Stapler] is

not carried over, so configure the setting again.

1. Press the [User Tools] icon on Home screen.

2. Press [Machine Features] > [System Setting] > [General Setting] >[Stapling Method for

Stapleless Stapler].

3. Select [Double] or [Single].

2. Installation

258

Questions and Answers:

Need help?

Do you have a question about the Ricoh MP C2504 and is the answer not in the manual?

Ricoh MP C2504 Specifications

General