Ricoh MP C2504 - Adjustment by Changing the Printer Driver Setting; Opening the Printer Drivers Color Balance Details Window

Adjustment Method Outline
Adjustment by Printer Gamma
Correction (page 650)
Basically, we recommend the default setting. Doing this
changes the tone of all images printed by the machine’s
printer function.
Adjustment by Changing the Printer Driver Setting
Using the printer driver, you can change the color balance for each print job as follows.
1. Open the printer driver’s "Color Balance Details" window. (page 640)
2. Adjust the tone (color gamut). (page 644)
Opening the Printer Driver's "Color Balance Details" Window
PCL6 driver / PS driver
1. Click [Detailed Setting] tab -> [Print Quality].
2. Click [Details...] in "Color Balance".
3. "Color Balance Details" window appears. (page 643)
4. Replacement and Adjustment
640