SC code Name
700-06 SPDF: Intermediate Motor Error
700-07 SPDF: Scanning Motor Error
700-09 SPDF: Paper Exit Motor Error
701-03 SPDF: Paper Feed Motor Driver Error
701-08 SPDF: Paper Exit Motor Driver Error
702-01 ARDF: Protection Device Intercept Error 1
702-02 ARDF: Protection Device Intercept Error 2
702-03 ARDF: Protection Device Intercept Error 3
702-04 SPDF: Protection Device Intercept Error 4
702-05 SPDF: Protection Device Intercept Error 5
780-01 Bank 1 (Upper optional paper tray) Protection Device Intercept Error
781-01 Bank 2 (Lower optional paper tray) Protection Device Intercept Error
791-00 No bridge unit when finisher is present
995-01 CPM setting error 1
995-02 CPM setting error 2
995-03 CPM setting error 3
995-04 CPM setting error 4
Controller SC
Automatic reboot target SC is as follows. For details of Automatic reboot, refer to page 747 "SC
Automatic Reboot".
SC code Name
632-00 Counter device error 1
633-00 Counter device error 2
634-00 Counter device error 3
Service Call Conditions
765
To Next Page
Loading...
