Ricoh MP C2504 - Controller SP Tables - SP5000

4. Controller SP Mode Tables
Controller SP Tables - SP5000
SP5-XXX (Mode)
5009 [Add Display Language]
Adds language available in user choice. (Only the languages registered in the
machine)
Refer to the displayed language list to set in the way showed below.
List Number Assigned Bit Switch
No.1 to 8 BIT1 to 8 (SP5-009-201)
No.9 to 16 BIT1 to 8 (SP5-009-202)
No.17 to 24 BIT1 to 8 (SP5-009-203)
No.25 to 32 BIT1 to 8 (SP5-009-204)
No.33 to 40 BIT1 to 8 (SP5-009-205)
No.41 to 48 BIT1 to 8 (SP5-009-206)
No.49 to 56 BIT1 to 8 (SP5-009-207)
Example: To add American(No.3 in the list) or Czech (No.15)
Turn Bit 3 of “SP5-009-201” 0 to 1 for American.
Turn Bit 7 of “SP5-009-202” 0 to 1 for Czech.
After setting, turn the main power switch off and on to make the setting valid.
5-009-201 1-8 *CTL [1 to 255 / 0 / 1]
5-009-202 9-16 *CTL [1 to 255 / 0 / 1]
5-009-203 17-24 *CTL [1 to 255 / 0 / 1]
5-009-204 25-32 *CTL [1 to 255 / 0 / 1]
5-009-205 33-40 *CTL [1 to 255 / 0 / 1]
5-009-206 41-48 *CTL [1 to 255 / 0 / 1]
5-009-207 49-56 *CTL [1 to 255 / 0 / 1]
497