E
<Bypass setting>
Copy window/Bypass/Standard size/Size select or select with the print bypass paper
size/size button from initial setting.
F
Select with SP from preset paper sizes.
Cannot be selected from printer driver.
G
Switches which size to set as auto detect with SP.
*Example: The combination of A1-G1.
G (When not auto detectable) will be as same as B.
Combinations are only made from same region same tray.
*Example: The combination of G1 and J1.
G (When not auto detectable) will be as same as E.
Combinations are only made from same region same tray.
H Size fixed when shipping.
I
<Bypass setting>
With bypass tray, after 1
st
sheet trailing edge goes through, auto detects size, then
fixed to size detected from the 2
nd
sheet.
J
<Bypass setting>
Auto detect of Copy window/Bypass/Standard size/Select with size button.
K
Select with SP from preset paper sizes.
Can be selected from printer driver.
- Not available
Bypass Tray
Size (W x L) [mm] Bypass
Region (EU/AA) NA EU/AA
A3 SEF (297 x 420) E J
A4 SEF (210 x 297) E J
A4 LEF (297 x 210) E J
A5 SEF (148 x 210) E J
Supported Paper Sizes
25
To Next Page
Loading...
