State
Energy Saving
LED
Operation panel
LCD
Engine
(Printer/Scanner)
HDD CTL
Standby/Printing ON ON ON ON ON
Printing state/Panel
OFF
ON OFF ON
(Only scanner is in
Quiet state)
ON ON
fusing OFF ON ON ON
(Both printer/
scanner are in
Quiet state)
ON ON
Quiet state ON OFF
ON*1
ON
(Both printer/
scanner are in
Quiet state)
ON ON
Engine OFF Blinking
gradually
ON*1
Sleep
OFF or ON*1
OFF OFF
ON*
1
ON
STR state Blinking
gradually
Sleep OFF OFF STR
Pre-recovery ON OFF
ON*1
OFF ON ON
*1 When [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)], ON/OFF is
determined by the internal timer of the Smart Operation Panel.
Transition of operation panel to Energy Saving when [Energy Saving Recvry. for Business
Applicatn.] is [On (Energy Saving)]
Normally, the Energy Saving state of the operation panel LCD changes in step with the energy
saving state of the MFP/LP main unit, but to support the scenario where an application that does
not use the engine (printer/scanner) is executed from the operation panel, the Energy Saving state
of the operation panel is transitioned through the three states ON, OFF, and Sleep with its internal
timer when [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)].
7. Detailed Descriptions
1214
To Next Page
Loading...
