1-121-150 Soaking Rotary Time:B5 *ENG [0 to 100 / 10 / 1sec/step]
1-121-151 Pre Job Paper Feed Time:A5 *ENG [0 to 10000 / 10000 / 1sec/step]
1-121-152 Soaking Rotary Time:A5 *ENG [0 to 100 / 10 / 1sec/step]
1-121-153 Pre Job Paper Feed Time:B6 *ENG [0 to 10000 / 10000 / 1sec/step]
1-121-154 Soaking Rotary Time:B6 *ENG [0 to 100 / 10 / 1sec/step]
1-121-155 Pre Job Paper Feed Time:A6 *ENG [0 to 10000 / 10000 / 1sec/step]
1-121-156 Soaking Rotary Time:A6 *ENG [0 to 100 / 10 / 1sec/step]
1122 [Standby Rotation Setting]
1-122-001 Rotation Interval *ENG [0 to 240 / 60 / 1min/step]
1-122-002 Rotation Time *ENG [0.0 to 60.0 / 8.0 / 0.1sec/step]
1123 [Paper Jam Rotation Setting]
1-123-001 Normal Rotation Distance *ENG [0 to 10000 / 75 / 1mm/step]
1-123-002 Reverse Rotation Distance *ENG [0 to 10000 / 25 / 1mm/step]
1124 [CPM Down Setting] DFU
1-124-001 High:Down Temp. *ENG [-50 to 0 / -30 / 1deg/step]
1-124-002 High:Up Temp. *ENG [-50 to 0 / -15 / 1deg/step]
1-124-003 Low :1st CPM *ENG [10 to 100 / 80 / 1%/step]
1-124-004 Low :2nd CPM *ENG [10 to 100 / 65 / 1%/step]
1-124-005 Low :3rd CPM *ENG [10 to 100 / 50 / 1%/step]
1-124-007 High:2nd CPM *ENG [10 to 100 / 50 / 1%/step]
1-124-008 High:3rd CPM *ENG [10 to 100 / 30 / 1%/step]
1-124-009 High:1st CPM Down
Temp.:A3:Press End
*ENG [100 to 250 / 205 / 1deg/step]
1-124-010 High:2nd CPM Down
Temp.:A3:Press End
*ENG [100 to 250 / 210 / 1deg/step]
3. Engine SP Mode Tables
102
To Next Page
Loading...
