Ricoh MP C2504 - Page 1411

2-103-001 Lead Edge Width ENG [0 to 9.9 / 4.2 / 0.1mm/step]
2-103-002 Trail. Edge Width ENG [0 to 9.9 / 4.2 / 0.1mm/step]
2-103-003 Left ENG [0 to 9.9 / 2 / 0.1mm/step]
2-103-004 Right ENG [0 to 9.9 / 2 / 0.1mm/step]
2-103-006 Duplex Trail. L Size ENG [-4 to 4 / 0.8 / 0.1mm/step]
2-103-007 Duplex Trail. M Size ENG [-4 to 4 / 0.8 / 0.1mm/step]
2-103-008 Duplex Trail. S Size ENG [-4 to 4 / 0.6 / 0.1mm/step]
2-103-009 Duplex Left Edge ENG [0 to 1.5 / 0.3 / 0.1mm/step]
2-103-010 Duplex Right Edge ENG [0 to 1.5 / 0.3 / 0.1mm/step]
2-103-011 Duplex Trail. L Size:Thick ENG [-4 to 4 / 0.8 / 0.1mm/step]
2-103-012 Duplex Trail. M Size:Thick ENG [-4 to 4 / 0.8 / 0.1mm/step]
2-103-013 Duplex Trail. S Size:Thick ENG [-4 to 4 / 0.6 / 0.1mm/step]
2-103-014 Duplex Left Edge:Thick ENG [0 to 1.5 / 0.3 / 0.1mm/step]
2-103-015 Duplex Right Edge:Thick ENG [0 to 1.5 / 0.3 / 0.1mm/step]
2-103-016 Duplex Trail. L Size:Thin ENG [-4 to 4 / 0.8 / 0.1mm/step]
2-103-017 Duplex Trail. M Size:Thin ENG [-4 to 4 / 0.8 / 0.1mm/step]
2-103-018 Duplex Trail. S Size:Thin ENG [-4 to 4 / 0.6 / 0.1mm/step]
2-103-019 Lead Edge Width:Thin ENG [0 to 9.9 / 4.2 / 0.1mm/step]
2-103-020 Trail. Edge Width:Thin ENG [0 to 9.9 / 4.2 / 0.1mm/step]
2106 [Polygon Rotation Time]
2-106-001 Warming-Up *ENG [0 to 60 / 10 / 1sec/step]
2-106-002 Job End *ENG [0 to 60 / 0.1 / 0.1sec/step]
2107 [Image Parameter]
2-107-001 Image Gamma Flag ENG [0 or 1 / 1 / 1/step]
2-107-002 Shading Correction Flag *ENG [0 or 1 / 0 / 1/step]
3. Engine SP Mode Tables
176