6. Attach the securing brackets [A] to two positions on the left and right at the rear of the
machine (screws: 1 each).
7. Reattach the paper feed tray to the machine.
8. Attach the decals as shown below.
[A]: Tray number decal
[B]: Paper size decal
• The tray number decal and paper size decal are packaged together with the machine.
9. Connect the power cord to the machine.
10. Turn ON the main power.
11. Set the paper, and check that the paper size set in the paper feed tray is displayed on the
operation panel.
2. Installation
138
To Next Page
Loading...
