Ricoh MP C2504

3-050-033 RepeatCount *ENG [0 to 255 / 8 / 1count/step]
3072 [T Sensor: Check]
3-072-001 Execute Check ENG [0 or 1 / 0 / 1/step]
[Execute]
3073 [T Sensor Measurement Value:]
3-073-001 mu count:K *ENG [0 to 65535 / 0 / 1/step]
3-073-002 mu count:C *ENG
3-073-003 mu count:M *ENG
3-073-004 mu count:Y *ENG
3100 [Tonner End Detection: Set]
3-100-001 ON/OFF *ENG [0 or 1 / 0 / 1/step]
Whether to decide NE/TE.
0: Enable
1: Disable
3-100-002 NE Detection *ENG [0 or 1 / 0 / 1/step]
NE decision method.
0: Counter & Toner End Sensor
1: Toner End Sensor Only
3101 [Toner Status :Disp]
3-101-001 K ENG [0 to 10 / 10 / 1/step]
10: Full
1: Near end
0: Toner end
3-101-002 C ENG
3-101-003 M ENG
3-101-004 Y ENG
3102 [Toner Remain:Disp]
Engine SP Tables - SP3000
323