Ricoh MP C2504 - Page 1572

Code Result detail
0 Did not EXEC. (SP default)
1 Succeed -
2 ID sensor proofread error
Out of range from Vsg= Vsg_reg(target
value)±x.x[V/step]
4 LED Ampere Max. error. Ifsg>Max.
5 ID sensor output error. Vsg< Vsg_reg(error)
9 Kill Kill by error of door open, power off.
3-323-001 Latest *ENG [0 to 999 / 0 / 1/step]
3-323-002 Latest 2 *ENG
3-323-003 Latest 3 *ENG
3-323-004 Latest 4 *ENG
3-323-005 Latest 5 *ENG
3-323-006 Latest 6 *ENG
3-323-007 Latest 7 *ENG
3-323-008 Latest 8 *ENG
3-323-009 Latest 9 *ENG
3-323-010 Latest 10 *ENG
3330 [ID.Sens Coef :Disp]
3-330-001 K2(Latest) (Front) *ENG [0 to 5 / 0 / 0.0001/step]
3-330-002 K2(Latest) (Center) *ENG [0 to 5 / 0 / 0.0001/step]
3-330-003 K2(Latest) (Rear) *ENG [0 to 5 / 0 / 0.0001 /step]
3-330-011 K5(Latest) (Front) *ENG [0 to 10 / 5 / 0.0001/step]
3-330-012 K5(Latest) (Center) *ENG [0 to 10 / 5 / 0.0001/step]
3-330-013 K5(Latest) (Rear) *ENG [0 to 10 / 5 / 0.0001/step]
Engine SP Tables - SP3000
337