Ricoh MP C2504

4309 [Scan Size Detect:Setting]
4-309-001 Original Density Thresh *ENG [0 to 2 / 1 / 1/step]
4-309-002 Detection Time *ENG [0 to 255 / 26 / 1digit/step]
4-309-003 Lamp ON:Delay Time *ENG [20 to 100 / 60 / 20msec/step]
4-309-004 LED PWM Duty *ENG [40 to 200 / 40 / 10msec/step]
4310 [Scan Size Detect Value]
4-310-001 S1:R ENG [0 to 255 / 0 / 1digit/step]
4-310-002 S1:G ENG
4-310-003 S1:B ENG
4-310-004 S2:R ENG
4-310-005 S2:G ENG
4-310-006 S2:B ENG
4-310-007 S3:R ENG
4-310-008 S3:G ENG
4-310-009 S3:B ENG
4400 [Org Edge Mask]
4-400-001 Book:Sub:LEdge(Left) *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4-400-002 Book:Sub:TEdge(Right) *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4-400-003 Book:Main:LEdge(Rear) *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4-400-004 Book:Main:Tedge(Front) *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4-400-005 ADF: Leading Edge *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4-400-007 ADF: Right *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4-400-008 ADF: left *ENG [0.0 to 3.0 / 0 / 0.1mm/step]
4417 [IPU Test Pattern]
3. Engine SP Mode Tables
370