Ricoh MP C2504

4-609-002 DF Scan *ENG [-384 to 255 / -100 / 1digit/step]
4610 [Gray Balance Set: G]
4-610-001 Book Scan *ENG [-384 to 255 / -100 / 1digit/step]
4-610-002 DF Scan *ENG [-384 to 255 / -100 / 1digit/step]
4611 [Gray Balance Set: B]
4-611-001 Book Scan *ENG [-384 to 255 / -100 / 1digit/step]
4-611-002 DF Scan *ENG [-384 to 255 / -100 / 1digit/step]
4635 [SSCG Correction Set]
4-635-001 Mode Selection *ENG [0 to 3 / 1 / 1/step]
0: Do not noise correct SSCG.
1: Only adjust analog (initial value)
2: Only adjust digital
3: Adjust both analog/digital
4646 [Scan Adjust Error]
Engine SP Tables - SP4000
385