Ricoh MP C2504 - Page 1633

5-611-001 B-C *ENG [0 to 128 / 100 / 1/step]
5-611-002 B-M *ENG [0 to 128 / 100 / 1/step]
5-611-003 G-C *ENG [0 to 128 / 100 / 1/step]
5-611-004 G-Y *ENG [0 to 128 / 100 / 1/step]
5-611-005 R-M *ENG [0 to 128 / 100 / 1/step]
5-611-006 R-Y *ENG [0 to 128 / 100 / 1/step]
5801 [Memory Clear]
5-801-002 Engine ENG [- / - / -]
[Execute]
5803 [INPUT Check]
See page 448 "Input Check Table"
5804 [OUTPUT Check]
See page 475 "Output Check Table"
5805 [Anti-Condensation Heater]
5-805-001 0:OFF / 1:ON *ENG [0 or 1 / 0 / 1/step]
0: OFF... Switches OFF when standby
(default setting)
1: ON... Switches ON when standby
5810 [SC Reset]
5-810-001 Fusing SC Reset ENG Clears the fusing SC.
5-810-002 Hard High Temp. Detection ENG Clears the fusing hardware SC.
5811 [MachineSerial]
5-811-002 Display *ENG [0 to 255 / 0 / 1/step]
3. Engine SP Mode Tables
398