Ricoh MP C2504

5-195-001 - *CTL [0 or 1 / 0 / 1]
0: Productivity Precede
1: Use paper up
5196 [Copier Vendor Mode]
5-196-001 90 deg. Rotation CTL [0 or 1 / 0 / 1]
5-196-002 Color and Tray Selection CTL [0 or 1 / 0 / 1]
5199 [Paper Exit After Staple End]
5-199-001 Staple(1:Without 2:After 0:Auto) CTL [0 to 2 / 0 / 1]
5-199-002 Saddle(1:Without 2:After 0:Auto) CTL [0 to 2 / 0 / 1]
5-199-003 Stapless(1:Without 2:After
0:Auto)
CTL [0 to 2 / 0 / 1]
5212 [Page Numbering]
5-212-003 Duplex Printout Left/Right Position
of Left/Right Facing
*CTL [-10 to 10 / 0 / 0.01mm/step]
5-212-004 Duplex Printout Top/Bottom
Position of Left/Right Facing
*CTL [-10 to 10 / 0 / 0.01mm/step]
5-212-018 Duplex Printout Left/Right Position
of Top/Bottom Facing
*CTL [-10 to 10 / 0 / 0.01mm/step]
5-212-019 Duplex Printout Top/Bottom
Position of Top/Bottom Facing
*CTL [-10 to 10 / 0 / 0.01mm/step]
5227 [Page numbering]
5-227-201 Allow Page No. Entry *CTL [2 to 9 / 9 / 1]
5-227-202 Zero Surplus Stting *CTL [0 or 1 / 0 / 1]
0:OFF
1:ON
Controller SP Tables - SP5000
507