Ricoh MP C2504 - Page 1759

bit 0 Start of FlairAPI
Server
Off
(Do not Start)
On
(Start)
Sets whether to start exclusive
FlairAPI http server. If it is 0,
scanning FlairAPI function and
simple UI function will be
disabled. The machine
installed Android operating
panel option, set “1”, others
set “0”.
bit 1 Access permission
of FlairAPI from
outside of the
machine
Disabled Enabled If it is “0”, accessing is limited
from the machine only, such
as operating panel, SDK/J,
MFP browsers etc... If it is “1”,
accessing is allowed from
outside of FlairAPI such as PC,
Remote UI, IT-Box etc...
bit 2 Reserved - - -
bit 3 Reserved - - -
bit 4 Simple UI Function Disabled Enabled If it is “1”, the machine can be
used Scanner Simple UI. If it is
“0”, requesting URL of Simple
UI returns “404 Not Found”
bit 5 Accessing
permission of
Simple UI from
outside of the
machine
Disabled Enabled If it is “0”, accessing is limited
from the machine only
(operating panel and MFP
browser). If it is “1”, accessing
is allowed from outside of
Simple UI such as PC, mobile
devices, and so on.
bit 6 Reserved - - -
bit 7 Reserved - - -
5755 [Display Setting]
5-755-001 Disp Administrator Password
Change Scrn
CTL [- / - / -]
5-755-002 Hide Administrator Password
Change Scrn
CTL [- / - / -]
4. Controller SP Mode Tables
524