5-816-067 Proxy Password *CTL [0 to 255 / 0 / 1]
Displays status of the certification used for Cumin.
If it is not installed as Cumin, the value of this SP will be set when it installed, after
checking the certification status.
0 The certification adequately set on the machine.
1 Request for certification update in progress.
2 Certification Update completed and notification of the success status to the
G/W in progress.
3 Certification Update failed and notification of the result to the G/W in progress.
4 Certification expiration date will be coming soon. Notifying the G/W to request
for certification update.
11 Rescue certification setting for connecting to the rescue G/W in progress
because update for rescue certification needed.
12 Setting for rescue certification has completed. Requesting to the rescue G/W
for updating certification.
13 Notification for certification updating request has completed. Waiting for the
certification update request from the rescue G/W.
14 Received the notification for certification updating request from the rescue
G/W. Writing the certification.
15 Writing the certification has completed. Notifying the result of certification
update to the G/W.
16 Writing the certification has failed. Notifying the result of certification update to
the G/W.
17 Writing a rescue certification because received a certification error again after
completed the certification update request from the G/W and noticed the result
of certification update with the updated certification.
18 The writing operation mentioned in #17 has completed. Notifying the result of
certification update to the rescue G/W.
4. Controller SP Mode Tables
530
To Next Page
Loading...
