Ricoh MP C2504

7-514-227 Tray Lift Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-228 Positioning Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-229 Stapler Movement Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-230 Stapler Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-231 Punch Motors *CTL [0 to 65535 / 0 / 1/step]
7-514-232 Paper Bundle Transport Motors *CTL [0 to 65535 / 0 / 1/step]
7-514-233 Trailing Edge Stopper Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-234 Folding Blade Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-235 Paper Guide Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-236 Stapleless Stapler Movement
Motor
*CTL [0 to 65535 / 0 / 1/step]
7-514-237 Stapleless Stapler Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-238 Moveable Guide Plate Motor *CTL [0 to 65535 / 0 / 1/step]
7-514-248 No Exit Response *CTL [0 to 65535 / 0 / 1/step]
7-514-249 Invalid Main Machine Data Setting *CTL [0 to 65535 / 0 / 1/step]
7515 [Original Jam Count by Detection]
7-515-001 At Power On *CTL [0 to 65535 / 0 / 1/step]
7-515-013 Separation Sensor: On *CTL [0 to 65535 / 0 / 1/step]
7-515-014 Skew Correction Sn: On *CTL [0 to 65535 / 0 / 1/step]
7-515-015 Scanning Entrance Sn: On *CTL [0 to 65535 / 0 / 1/step]
7-515-016 Registration Sensor: On *CTL [0 to 65535 / 0 / 1/step]
7-515-017 Original Exit Sensor: On *CTL [0 to 65535 / 0 / 1/step]
7-515-063 Separation Sensor: Off *CTL [0 to 65535 / 0 / 1/step]
7-515-034 Skew Correction Sn: Off *CTL [0 to 65535 / 0 / 1/step]
7-515-035 Scanning Entrance Sn: Off *CTL [0 to 65535 / 0 / 1/step]
4. Controller SP Mode Tables
584