005 Z-Fold *CTL [0 to 99999999 / 0 / 1/step]
Number of jobs started In any mode other than the Booklet mode and set for folding (Z-
fold).
006 Punch *CTL [0 to 99999999 / 0 / 1/step]
Number of jobs started in Punch mode. When Punch is set for a print job, the P: counter
increments. (See SP8-064-6.)
007 Other *CTL [0 to 99999999 / 0 / 1/step]
008 Inside-Flod *CTL [0 to 99999999 / 0 / 1/step]
009 Three-In-Fold *CTL [0 to 99999999 / 0 / 1/step]
010 Three-OUT-Fold *CTL [0 to 99999999 / 0 / 1/step]
011 Four-Fold *CTL [0 to 99999999 / 0 / 1/step]
012 KANNON-Fold *CTL [0 to 99999999 / 0 / 1/step]
013 Perfect-Bind *CTL [0 to 99999999 / 0 / 1/step]
014 Ring-Bind *CTL [0 to 99999999 / 0 / 1/step]
015 3rd Vendor *CTL [0 to 99999999 / 0 / 1/step]
8071 [T:Jobs/PGS]
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
8072 [C:Jobs/PGS]
These SPs count and calculate the number of copy jobs by size based on the number of
pages in the job.
8073 [F:Jobs/PGS]
These SPs count and calculate the number of fax jobs by size based on the number of
pages in the job.
8074 [P:Jobs/PGS]
These SPs count and calculate the number of print jobs by size based on the number of
pages in the job.
4. Controller SP Mode Tables
604
To Next Page
Loading...
