Ricoh MP C2504

bit 4 Color balance switching Disabled Enabled
This BitSwitch can be used to restore the color balance to match that of
previous models. If this BitSwitch is set to "1" (Enabled), the color balance
from 09A and Extended 09A models will be used.
bit 5 DFU - -
bit 6 Switch dither Use normal
dither
Use alternative
dither
*Please refer to RTB#RD014018
bit 7 DFU - -
1001 [Bit Switch]
1-001-003 Bit Switch 3 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 [PCL5e/c]: Legacy HP compatibility Disabled Enabled
Uses the same left margin as older HP models such as HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A") will
be changed to "<ESC>*r1A".
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 [Bit Switch]
4. Controller SP Mode Tables
654