3. Insert the integrated SD card in Slot 1 [A: Upper].
4. Insert the SD card which became empty after integration in Slot 2 (lower slot).
5. Turn On the main power, and press [ENTER] in SP5-873-002 (SD Card Appli Move: Undo
Exec).
6. When a confirmation screen is displayed, press [ENTER].
• If [CANCEL] is pressed, the display returns to the previous screen.
• Note that if the power supply is turned off, a panel operation is performed, or the cover is
opened during cancellation, it will result in a malfunction.
7. When cancellation is complete, press [CLOSE].
8. Press [END] twice.
9. Turn OFF the main power.
10. Reattach the SD card slot cover (
×1).
11. Turn ON the main power, and check that the application has been deleted.
SD Card Appli Move
351
To Next Page
Loading...
