2. Insert the PS3 SD card in SD card slot 1 [A: Upper Slot].
3. Reattach the SD card slot cover ( ×1).
4. Stick the "Adobe PostScript3" decal [A] on the front face of the MFP.
5. Turn ON the main power.
6. Print out the "Configuration Page", and then check if this option is correctly recognized.
• User Tools > Machine Features > Printer Features > List/Test Page > Configuration Page
• The PDF firmware installed as standard contains a program required to print PS3 data as default.
However, this PS3 program is normally disabled.
• The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the PS3
firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this specification, the
self-diagnosis result report shows the ROM part number/software version of the PDF firmware
contained in the PS3 program.
PostScript3 Unit Type M19 (D3BD-05, -06, -07)
353
To Next Page
Loading...
