Type Storage Timing Destination (maximum storage
capacity)
FCU device log • When a specified amount of
FCU device log is stored in the
FCU. If fax application is
unavailable (e.g. not
installed), the machine does
not transfer the log.
HDD or SD card connected to the
service slot
Operation panel log • When an error related to the
operation panel occurs.
Memory in the operation panel.
• Device logs are not saved in the following conditions:
• While erasing all memory
• While data encryption equipment is installed
• While changing the firmware configuration
• Forced power OFF (accidentally disconnecting the outlet)
• Engine device log while the machine is shutting down
• When the power supply to the HDD is off because of energy saving (engine OFF mode/STR
mode)
• When one of the following SCs occurs: SC672, SC816, SC819, SC878, SC899, SC859,
SC860, SC861, SC863, or SC864
• The following logs are not saved:
• Logs related to the energy saver mode (Engine-off, suspend-mode, or other cases)
Network communication log
Logs related to NRS
IP-FAX log
Access log for unauthorized users (guests)
• HTTP session timeout log
• Auto log-out log
• IC card related log
• Authorization for Fax
• The default save destination is the HDD. Except when it cannot be saved to the HDD for some
reason, there is no need to change from the HDD to an SD card.
Capturing the Device Logs
721
To Next Page
Loading...
Need help?
General
