SC No. Type Error Name/Error Condition/Major Cause/Solution
SC724-42 B Stapler Displacement Movable Motor Error
• Sifter stapler displacement HP sensor ON, even when the stapler
retreat motor is driven for 0.25 sec., the HP sensor does not switch
OFF (1st time is jam notification, 2nd time is SC notification).
• After stapler displacement HP sensor OFF, even when the stapler
retreat motor is driven for 4.5 sec. the HP sensor does not switch
ON (1st time is jam notification, 2nd time is SC notification).
SC724-70 B Shift Tray Ascent/Descent Motor Error
• During ascent from paper surface sensor ON, even after 2 sec.
elapses, the paper surface sensor does not switch OFF (1st time is
jam notification, 2nd time is SC notification).
• During descent from paper surface sensor OFF, the paper surface
sensor does not switch ON even after 2 sec. elapses (1st time is jam
notification, 2nd time is SC notification).
• During descent to the packing position, the full sensor does not
switch ON even if 2 sec. elapses.
SC724-71 B Shift Motor Error
The level of shift sensor output does not change when the shift motor is
driven for 1.86 sec. after the motor in turned ON.
Service Call 700-792
909
To Next Page
Loading...
