3. Check the user’s network environment and, as required, specify the proxy server settings
in the following SPs:
• SP5-819-062 (Use Proxy DFU(SSP))
1: Use / 0: Not use
• SP5-816-063 (Use Proxy DFU(SSP))
• SP5-816-064 (Proxy Port Number)
• SP5-816-065 (Proxy User Name)
• SP5-816-066 (Proxy Password)
They can be specified also via Web Image Monitor from Device by logging in with the
administrator authorization. Management>Configuration>Device Setting>Auto Firmware Update.
• “Auto Firmware Update" will appear on Web Image Monitor if
SP5-886-111(AutoUpdateSetting) is set to "1(ON)."
4. Set SP5-886-111 (AutoUpdateSetting) to "1(ON)."
• To download the firmware only using SFU, and not by ARFU, specify the settings as follows:
- SP5-886-111(AutoUpdateSetting) to "0 (OFF)"
- SP5-886-115 (SfuAutoDownloadSetting) to "1 (ON)"
5. Set the prohibited day of the week, and time, of the auto firmware update.
6. Consider usages of customer’s MFP, change the following as needed.
• SP5-886-112 (AutoUpdateProhibitTermSetting)
0: OFF, 1: ON (Default )
• SP5-886-113 (AutoUpdateProhibitStartHour)
Default: 9
• SP5-886-114 (AutoUpdateProhibitEndHour)
Default: 17
• SP5-886-120 (AutoUpdateProhibitDayOfWeekSetting)
Default: 0x00
Set the bits for the days of the week to prohibit updating.
Prohibited (Monday - Sunday): Bit 7
Monday: bit 6
Tuesday: bit 5
Wednesday: bit 4
Thursday: bit 3
Main Machine Installation
85
To Next Page
Loading...
Need help?
General
