SC No. Type Error Name/Error Condition/Major Cause/Solution
SC995-03 D CPM setting error 3
Comparison of machine serial number (11 digits) and machine
identification code.
Details:
Unable to recognize machine identification code because the controller
was replaced incorrectly or is malfunctioning.
Machine serial number (11 digits) or machine identification code does
not match.
Replace it with a specified controller.
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC995-04 D CPM setting error 4
Comparison of machine serial number (11 digits) and machine
identification code.
Machine serial number (11 digits) or machine identification code does
not match.
Return the parts to the original configuration, and then replace them
according to the manual.
Service Call 900-998
959
To Next Page
Loading...
