Operating Instructions Maintenance Guide 2 Copier System Edition
53
Paper size and type of tray # are mis-
matched.
Select another tray from followings
and press [Continue]. To cancel job,
press [Reset]. Paper size and type can
also be changed in User Tools.
Required:<xxx> <yyy>
The paper size and the paper type set-
tings of the input paper tray are not
the same as those of the printer driv-
er.
#: tray number
<xxx>: paper size
<yyy>: paper type
Load the required paper size and type
into the paper input tray #.
Paper size of Tray # is mismatched.
Select another tray from followings
and press [Continue]. To cancel job,
press [Reset]. Paper size can also be
changed in User Tools.
Required:<xxx> <yyy>
The paper size settings of the input
paper tray is not the same as those of
the printer driver.
#: tray number
<xxx>: paper size
<yyy>: paper type
Load the required paper size into the
paper input tray #.
Paper type of Tray # is mismatched.
Select another tray from followings
and press [Continue]. To cancel job,
press [Reset]. Paper type can also be
changed in User Tools.
Required:<xxx> <yyy>
The paper type settings of the input
paper tray is not the same as those of
the printer driver.
#: tray number
<xxx>: paper size
<yyy>: paper type
Load the required paper type into the
paper input tray #.
Parallel I/F board has a problem. There is a problem with the parallel
interface.
If you use the parallel I/F, replace the
interface cable that caused the error.
If the message appears again, contact
your sales or service representative.
Messages Description Solution
To Next Page
Loading...
