Lanier Copier System Edition - Page 288

Operating Instructions Administrator Reference 2
59
C In the [Print Queue name] box, type the name of the print queue.
D In the [Print Queue Volume] box, click [Browse] button.
E In the [Available objects] box, click the volume in which the print queue is created, and click
[OK].
F After confirming the settings, click [Create].
J
JJ
J
Create a printer as follows.
A Select the container object the printer is located in, and click [Create] in the [Object] menu.
B In the [Class of new object] box, click "Printer", and click [OK]. When you are using Net-
Ware 5, click "Printer (Non NDPS)".
C In the [Printer name] box, type the name of the printer.
D Click [Define additional properties] to check a box, and click [Create].
K
KK
K
Assign print queues to the created printer as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
I
, and click [OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the drop-down
menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and click [OK].
E After confirming the settings, click [OK].
L
LL
L
Create a print server as follows.
A Select the context specified using the NIB Setup Tool (Step
F
-A
AA
A), and on the [Object] menu,
click [Create].
B In the [Class of new object] box, click "Print Server", and click [OK]. When you are using
NetWare 5, click "Print Sever (Non NDPS)".