Operating Instructions Administrator Reference 2
210
IPP
Use the ipp command to configure the IPP settings.
❖
❖❖
❖ Viewing setting
The following command displays the current IPP settings.
msh> ipp
Example output:
timeout=900(sec)
auth basic
• The "timeout" setting specifies how many seconds the computer keeps trying to access the net-
work printer to send print jobs when no connection could be made.
• The "auth" setting indicates the user authorization mode.
❖
❖❖
❖ IPP timeout configuration
Specify how many seconds to wait before canceling a print job if it has been interrupted for some
reason. The range of time can be changed between 30 to 65535 seconds.
msh> ipp timeout {30 -65535}
❖
❖❖
❖ IPP user authorization configuration
Use the IPP user authorization to restrict users that can print with IPP. The factory default is "off" .
msh> ipp auth {basic|digest|off}
• "basic" and "digest" are user authorization setting.
• "off" removes a user's authorization.
Note
❒ If you select "basic" or "digest", see next section "Configuring IPP user authorization" for how to
configure the user name. Up to ten user names are available.
To Next Page
Loading...
