Operating Instructions Administrator Reference 2
211
❖
❖❖
❖ Configuring IPP user authorization
Use the following command:
msh> ipp user
The following message appears.
msh> Input user number (1 to 10):
Type the number, user name and password.
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the following message appears.
User configuration changed.
SMB
Use the smb command to configure or delete the computer name or workgroup name for NetBEUI.
msh >smb parameter
Parameter Settings
smb comp Your computer name consisting of up to 13 characters
smb group Workgroup name consisting of up to 15 characters
smb comment Comment consisting of up to 31 characters
smb clear comp Clears complete name
smb clear group Clears Workgroup name
smb clear comment Clears comment
To Next Page
Loading...
