Operating Instructions Administrator Reference 2
217
Error: Parallel I/F Board An error has occurred in the parallel
interface board.
First, turn the power switch off and
then on. If the message appears again,
call your sales or service representa-
tive.
Full: Finisher All output trays of the optional Fin-
isher are full.
Remove paper from the Finisher.
Full: Finisher Tray 1 Output tray 1 of the optional Finisher
is full.
Remove paper from the Finisher.
Full: Finisher Tray 2 Output tray 2 of the optional Finisher
is full.
Remove paper from the Finisher.
Full: Hole Punch Receptacle Hole Punch Receptacle of the option-
al Finisher is full.
Remove Hole Punch Receptacle from
the Finisher.
Full: Mailbox All output trays of the optional Mail-
box are full.
Remove paper from the Mailbox.
Full: Mailbox Tray 1 The output tray 1 of the optional
Mailbox is full.
Remove paper from the output tray 1
of the optional Mailbox.
Full: Mailbox Tray 2 The output tray 2 of the optional
Mailbox is full.
Remove paper from the output tray 2
of the optional Mailbox.
Full: Mailbox Tray 3 The output tray 3 of the optional
Mailbox is full.
Remove paper from the output tray 3
of the optional Mailbox.
Full: Mailbox Tray 4 The output tray 4 of the optional
Mailbox is full.
Remove paper from the output tray 4
of the optional Mailbox.
Full: Output Tray(s) All output trays are full. Remove paper from all output trays.
Full: Standard Tray The standard tray is full. Remove paper from standard trays.
Messages Description Comments
To Next Page
Loading...
