NOTE
Do not modify pin configuration registers associated with pins
not available in your selected package. All unbonded pins not
available in your package will default to DISABLE state for
lowest power consumption.
Address: Base address + 0h offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
PDO
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GPIOx_PDOR field descriptions
Field Description
PDO Port Data Output
Register bits for unbonded pins return a undefined value when read.
0 Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
1 Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
50.2.2 Port Set Output Register (GPIOx_PSOR)
This register configures whether to set the fields of the PDOR.
Address:
Base address + 4h offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
W
PTSO
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GPIOx_PSOR field descriptions
Field Description
PTSO Port Set Output
Writing to this register will update the contents of the corresponding bit in the PDOR as follows:
0 Corresponding bit in PDORn does not change.
1 Corresponding bit in PDORn is set to logic 1.
Chapter 50 General-Purpose Input/Output (GPIO)
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 1379
To Next Page
Loading...
Need help?
General
