EasyManuals Logo

NXP Semiconductors K22F series User Manual

NXP Semiconductors K22F series
1407 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #632 background imageLoading...
Page #632 background image
IFR — Nonvolatile information register found in each flash block, separate from the
main memory array.
Longword — 32 bits of data with an aligned longword having byte-address[1:0] = 00.
NVM — Nonvolatile memory. A memory technology that maintains stored data during
power-off. The flash array is an NVM using NOR-type flash memory technology.
NVM Normal Mode — An NVM mode that provides basic user access to flash memory
module resources. The CPU or other bus masters initiate flash program and erase
operations (or other flash commands) using writes to the FCCOB register group in the
flash memory module.
NVM Special Mode — An NVM mode enabling external, off-chip access to the memory
resources in the flash memory module. A reduced flash command set is available when
the MCU is secured. See the Chip Configuration details for information on when this
mode is used.
Phrase — 64 bits of data with an aligned phrase having byte-address[2:0] = 000.
Program flash — The program flash memory provides nonvolatile storage for vectors
and code store.
Program flash Sector — The smallest portion of the program flash memory
(consecutive addresses) that can be erased.
Retention — The length of time that data can be kept in the NVM without experiencing
errors upon readout. Since erased (1) states are subject to degradation just like
programmed (0) states, the data retention limit may be reached from the last erase
operation (not from the programming time).
RWW— Read-While-Write. The ability to simultaneously read from one memory
resource while commanded operations are active in another memory resource.
Secure — An MCU state conveyed to the flash memory module as described in the Chip
Configuration details for this device. In the secure state, reading and changing NVM
contents is restricted.
Word — 16 bits of data with an aligned word having byte-address[0] = 0.
29.2
External Signal Description
The flash memory module contains no signals that connect off-chip.
External Signal Description
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
632 NXP Semiconductors

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NXP Semiconductors K22F series and is the answer not in the manual?

NXP Semiconductors K22F series Specifications

General IconGeneral
BrandNXP Semiconductors
ModelK22F series
CategoryController
LanguageEnglish

Related product manuals