No transposition occurs.
2. CTRL[TOT] or CTRL[TOTR] is 01
Bits in a byte are transposed, while bytes are not transposed.
reg[31:0] becomes {reg[24:31], reg[16:23], reg[8:15], reg[0:7]}
15
15
8
7
0
0
7
8
31
31
24
23
16
16
23
24
Figure 32-2. Transpose type 01
3. CTRL[TOT] or CTRL[TOTR] is 10.
Both bits in bytes and bytes are transposed.
reg[31:0] becomes = {reg[0:7], reg[8:15],reg[16:23], reg[24:31]}
Figure 32-3. Transpose type 10
4. CTRL[TOT] or CTRL[TOTR] is 11.
Bytes are transposed, but bits are not transposed.
reg[31:0] becomes {reg[7:0], reg[15:8], reg[23:16], reg[31:24]}
Functional description
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
748 NXP Semiconductors
To Next Page
Loading...
