Table 36-2. Modes of operation
Modes of operation Description
Wait mode The DAC will operate normally, if enabled.
Stop mode
If enabled, the DAC module continues to operate
in Normal Stop mode and the output voltage will
hold the value before stop.
In low-power stop modes, the DAC is fully
shut down.
NOTE
The assignment of module modes to core modes is chip-
specific. For module-to-core mode assignments, see the chapter
that describes how modules are configured.
Functional description
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
856 NXP Semiconductors
To Next Page
Loading...
Need help?
General
