6-007-008 Original Width 5 ENG [0 or 1 / 0 / 1/step]
6-007-009 Original Detection ENG [0 or 1 / 0 / 1/step]
6-007-011 Skew Correction ENG [0 or 1 / 0 / 1/step]
6-007-013 Registration Sensor ENG [0 or 1 / 0 / 1/step]
6-007-014 Exit Sensor ENG [0 or 1 / 0 / 1/step]
6-007-015 Feed Cover Sensor ENG [0 or 1 / 0 / 1/step]
6-007-016 Lift Up Sensor ENG [0 or 1 / 0 / 1/step]
6-007-023 Rear Edge Detection ENG [0 or 1 / 0 / 1/step]
6011 [1-Pass ADF INPUT Check]
For Single-Pass simultaneous duplex models only.
6-011-001 Original Length 1 (B5 Sensor) ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
6-011-002 Original Length 2 (A4 Sensor) ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
6-011-003 Original Length 3 (LG Sensor) ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
6-011-004 Original Width 1 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
6-011-005 Original Width 2 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
6-011-006 Original Width 3 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
6-011-007 Original Width 4 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.
Input and Output Check
463
To Next Page
Loading...
