6-123-058 Tray Upper Limit SW ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-059 Paper Exit Open/Close Guide
Plate Limit SW
ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-060 Punch Selection DIPSW 1 ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-061 Punch Selection DIPSW 2 ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-065 Paper Guide HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-066 Shift Jogger HP Sensor: Front ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-067 Shift Jogger HP Sensor: Rear ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-068 Shift Jogger Retraction HP
Sensor: Upper
ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-069 Shift Jogger Retraction HP
Sensor: Lower
ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6135 [INPUT Check: FrontFIN]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-135-001 Entrance Sensor *ENG [0 or 1 / 0 / 1/step]
6-135-002 Carry Sensor *ENG [0 or 1 / 0 / 1/step]
6-135-003 Exit Sensor *ENG [0 or 1 / 0 / 1/step]
3. Engine SP Mode Tables
470
To Next Page
Loading...
