Ricoh MP C2504 - Page 1724

6-124-001 Entrance Transport Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-002 Horizontal Transport Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-003 Pre-Stack Transport Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-004 ITB Transport Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-005 Paper Exit Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-006 Upper Junction Solenoid ENG [0 or 1 / 0 / 1/step]
Turns NO/OFF specified solenoid for validation.
6-124-007 TE Stack Plate Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-008 Paper Exit Open/Close
Guide Plate Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-009 Punching Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-010 Punch Move Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-011 S-to-S Registration
Detection Move Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
6-124-012 Lower Junction Solenoid
Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
Input and Output Check
489