1-001-005 Bit Switch 5 0 1
bit 0 Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation panel.
Disabled Enabled
If enabled, users will be able to configure a Collate Type, Staple Type, and
Punch Type from the operation panel. The available Types will depend on the
device and configured options.
After enabling this BitSw, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 Multiple copies if a paper size or type
mismatch occurs
Disabled
(single
copy)
Enabled
(multiple)
If a paper size or type mismatch occurs during the printing of multiple copies,
only a single copy is output by default. Using this BitSw, the device can be
configured to print all copies even if a paper mismatch occurs.
bit 2 Prevent SDK applications from altering the
contents of a job.
Disabled Enabled
If this BitSw is enabled, SDK applications will not be able to alter print data.
This is achieved by preventing SDK applications from accessing a module
called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of SDK
applications on data.
4. Controller SP Mode Tables
656
To Next Page
Loading...
