1-001-012 Bit Switch C 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 Change the user ID type displayed on the
operation panel
Login User
Name
User ID
As of 15S models, the Login User Name can be displayed on the operation
panel. The user ID type displayed on the operation panel can be changed by
configuring BitSwitch #12-5 as follows:
- 0 (default): Login User Name
- 1: User ID. If this is enabled, User ID will be displayed, which is equivalent
to the behavior exhibited in 14A and earlier models.
bit 6 Ability to use AirPrint Enabled Disabled
For 15S and later models that support AirPrint, AirPrint can be disabled by
changing this Bit Switch from 0 (default) to 1.
bit 7 DFU - -
1003 [Clear Setting]
1-003-001 Initialize System *CTL [- / - / -]
[Execute]
Initializes settings in the "System" menu of the user mode.
1-003-003 Delete Program *CTL [- / - / -]
[Execute]
1004 [Print Summary]
Prints the service summary sheet (a summary of all the controller settings).
1-004-001 Print Summary *CTL [- / - / -]
[Execute]
Printer Service Menu
665
To Next Page
Loading...
