Ricoh MP C2504 User Manual

Display contents
On the above screen, two programs, i.e., engine firmware and printer application are displayed.
(The screen may change depending on the firmware or application).
The display contents are as follows:
Display Contents
ROM: Display installed module number / version information.
NEW: Display module number / version information in the card.
The upper row corresponds to the module name, the lower row corresponds to the version number.
8. Select the module with the module selection button or 10 key pad operation. The selected
module is highlighted, and [Verify] and [Update] are displayed.
• Depending on the combination of modules to update, it may not be possible to select all of
them simultaneously.
<<Key or button operations>>
Keys or buttons to press Contents
[Update] or [#] key Update the ROM of the selected module.
[Verify] button or [./*] key Perform verification of the selected module.
9. Press the [Update] or [#] key, and perform software update.
5. System Maintenance
678

Ricoh MP C2504 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Type	Flatbed, ADF
Max Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Memory (RAM)	2 GB
Print Speed	25 ppm (A4)
Copy Speed	25 cpm (A4)
Fax Resolution	200 x 200 dpi
Paper Capacity	1200 sheets
Connectivity	USB, Ethernet, Wi-Fi
Dimensions	587 x 685 x 913 mm
Control Panel	9-inch Smart Operation Panel